Enclosure container 6×2.43m, air conditioning 5.5kW -Wall: PU sandwich panel, roof: PU foam;

Description Control cabinet container 6×2.43m, air conditioning 5.5kW -Wall: PU sandwich panel, roof: PU foam;

50 mm PU wall panels

External dimensionsLength 6,058 mm x width 2,435 mm x height 2,800 mm
Room height: 2,500 mm

Floor

• Frame construction: Welded galvanised steel profiles, 3 mm thick, 4 container corners welded, dimensions according to ISO standard
• Flooring: waterproof glued chipboard with homogeneous plastic floor covering from Graboplast 2.0 mm thick R10, fire behaviour class Bfl - flame retardant, smoke development s1 according to EN 13501-1, PUR-coated surface, welded strips, environmentally friendly dispersion-based adhesive
• Subfloor: 0.55 mm thick sheet steel, galvanised and coated. Load capacity: 2.0 kN/m2, self-supporting
• Insulation: 80 mm polyurethane, 0.26W/m2K with stacker pockets

Roof

• Frame construction: Welded galvanised steel profiles, 3 mm thick, 4 container corners welded, dimensions according to ISO standard
• CEE connection: Recessed in the front roof frame
• Cover: White sheet metal
• Load capacity: 1.00 kN/m2
• Ceiling cladding: Smooth sheet metal in colour RAL 9010
• Insulation: 30 mm PU panel + 80 mm polyurethane; 0.19 W/m2K
• Rainwater drainage: above the walls

Corner columns

• Profile: Made of galvanised cold-rolled 3 mm thick steel profiles, flank dimensions 150/180 mm
• Connection: The four corner pillars are welded to the floor frame and the roof frame
• Insulation: Corner columns are insulated with polystyrene panels to avoid thermal bridges

Exterior wall panels

• Prefabricated panels with polyurethane insulation
• External cladding: made of profiled, galvanised sheet metal, plastic-coated on the outside, thickness 0.55 mm, in standard colour RAL-7035 light grey, coating min. 25 my
• Internal cladding: made of smooth, galvanised sheet metal; plastic-coated, thickness 0.55 mm, coating min. 25 my, standard colour RAL 9010 pure white
• Insulation: Polyurethane 50 mm; 0.41W/m2K

Windows

• without window

Exterior doors

• 2 pieces ZK steel door from Hörmann, 875/2000mm, complete with cylinder lock

Metal pre-treatment and painting

• All black sheet steel profiles are cleaned, degreased and immediately primed; all thin sheets are galvanised.
• Primer: 2K-HS REESA 3D061 min. 50 μm
• Top coat: 2K-HS-PUR REESA 6D061 min. 50 μm
• The colour of the container frames is RAL-7035 light grey

Electrical installation

• All parts comply with the VDE standard
• Technical data: Voltage 380V, 50 Hz
• Outside: Via CEE plug/socket 5-pin/32A, recessed in the roof frame.
• Inside:
  • 2 double sockets
  • 1 light switch/socket combination
  • 2 light bars with protective glass and LED tubes 2 x 18 W
  • 1 piece 2.0KW heater from Stiebel Eltron
  • 1 split air conditioner cooling capacity 5.5kW - Toshiba or Vaillant

• Earthing: With an earthing conductor Screws and screw nut
• The buyer/renter is responsible for the protective earthing of the container at the installation site