Description Sanitary container / shower container for men/women 6 m, 2 WCs, 4 washbasins
50 mm PU wall panels
External dimensionsLength 6,058 mm x width 2,435 mm x height 2,800 mm
Room height: 2,500 mm
Floor
- Frame construction: Welded galvanised steel profiles, 3 mm thick, 4 container corners welded, dimensions according to ISO standard
- Flooring: waterproof glued chipboard with homogeneous plastic floor covering from Graboplast 2.0 mm thick R10, fire behaviour class Bfl - flame retardant, smoke development s1 according to EN 13501-1, PUR-coated surface, welded strips, environmentally friendly dispersion-based adhesive
- Subfloor: 0.55 mm thick sheet steel, galvanised and coated. Load capacity: 2.0 kN/m2, self-supporting
- Insulation: 80 mm polyurethane, 0.26W/m2K with stacker pockets
Roof
- Frame construction: Welded galvanised steel profiles, 3 mm thick, 4 container corners welded, dimensions according to ISO standard
- CEE connection: Recessed in the front roof frame
- Cover: White sheet metal
- Load capacity: 1.00 kN/m2
- Ceiling cladding: Smooth sheet metal in colour RAL 9010
- Insulation: 30 mm PU panel + 80 mm polyurethane; 0.19 W/m2K
- Rainwater drainage: above the walls
Corner columns
- Profile: Made of galvanised cold-rolled 3 mm thick steel profiles, flank dimensions 150/180 mm
- Connection: The four corner pillars are welded to the floor frame and the roof frame
- Insulation: Corner columns are insulated with polystyrene panels to avoid thermal bridges
Exterior wall panels
- Prefabricated panels with polyurethane insulation
- External cladding: made of profiled, galvanised sheet metal, plastic-coated on the outside, thickness 0.55 mm, in standard colour RAL-7035 light grey, coating min. 25 my
- Internal cladding: made of smooth, galvanised sheet metal; plastic-coated, thickness 0.55 mm, coating min. 25 my, standard colour RAL 9010 pure white
- Insulation: Polyurethane 50 mm; 0.41W/m2K
Windows
-
2 single-vent tilt-and-turn PVC-U windows 650x450mm with double insulating glazing, without roller shutters
Exterior doors
-
2 pieces ZK steel door from Hörmann, 875/2000mm, complete with cylinder lock
Metal pre-treatment and painting
- All black sheet steel profiles are cleaned, degreased and immediately primed; all thin sheets are galvanised.
- Primer: 2K-HS REESA 3D061 min. 50 μm
- Top coat: 2K-HS-PUR REESA 6D061 min. 50 μm
- The colour of the container frames is RAL-7035 light grey
Electrical installation
- All parts comply with the VDE standard
- Technical data: Voltage 380V, 50 Hz
- Outside: Via CEE plug/socket 5-pin/32A, recessed in the roof frame.
- Inside:
- 4 sockets
- 2 light switches
- 2 light bars with protective glass and LED tubes 2 x 18 W
- 2 pieces 2,0KW heater from Stiebel Eltron
- Earthing: With an earthing conductor Screws and screw nut
- The buyer/renter is responsible for the protective earthing of the container at the installation site
Sanitary equipment
- Sani installation in surface-mounted design
- 2 toilets
- 4 washbasins
- 1 urinal
- 2 showers
- 1 piece 300l boiler