Buy office containers in Nuremberg, Erlangen, Fürth

PH Container & modular construction / Buy office containers in Nuremberg, Erlangen, Fürth

In the case of modules with alternating walls, also known as wall panels, these sandwich panels are made of galvanised and painted sheet metal on both sides. There are two different types of insulation for the panels. Either Mineral wool as insulation is used, which is produced from molten rock or glass, or it is produced with Rigid polyurethane foam (PU panels). Rigid PU foam is a pressure-resistant, permanently water-repellent insulating material that is resistant to most chemicals used in construction. It does not melt even at high temperatures and has low thermal conductivity.

Mineral wool is inexpensive, has good sound insulation properties and a certain degree of fire protection. Compared to PU panels, however, it is heavier, has a poorer insulation value and is not water-repellent. PU container walls have the clear advantage in terms of weight and thermal insulation value. Polyurethane is also water-repellent and particularly durable. For this reason, it is often used for toilet containers and sanitary containers. However, its sound insulation and fire resistance properties are inferior to those of mineral wool.

There is relatively little scope for colour design with this type of construction, which is particularly important for construction site containers and construction site equipment. The panels are usually only available in a few standard colours such as RAL 7035 light grey, RAL 9010 pure white, RAL 9002 cream white, RAL 3000 fire red and RAL 6010 gentian blue. This is the reason why many of our office containers in Nuremberg and the Fürth, Erlangen, Schwabach metropolitan region look very similar! Painting the wall panels at a later date is quite expensive.

The advantage of the removable walls is that they can be expanded if requiredso that individual containers can be Office container systems can be converted. The PU panels can then be stored temporarily. It is also possible to change the panels so that instead of a full wall in an office container, a Panel with window or even with air conditioning is installed. The canopy roof means that there is no controlled drainage of the office containers. The rainwater simply runs down the façade and therefore cannot be drained into the sewage system. Residential containers with a canopy roof can be recognised by the fact that the roof frame is slightly higher at the corners of the container. This allows another module to be stacked on top of the office container without the canopy roof being pushed in.

The sandwich panels mean that the walls and ceiling of the container are made of sheet metal. This has the advantage that it Easy to wash off and is Attach construction site plans everywhere with magnets leave. On the other hand, the sheet steel interior walls give the rooms a very cool and sterile appearance. The following standard sizes are available for the external dimensions of PU office containers, which are specified in feet based on the freight containers.

External dimensions (length, width, height):

• 10 feet: 2989 x 2435 x 2600 or 2800 mm
• 16 feet 4885 x 2435 x 2600 or 2800 mm
• 20 feet 6058 x 2435 x 2600 or 2800 mm
• 24 feet: 7335 x 2435 x 2600 or 2800 mm
• 30 feet: 9120 x 2435 x 2600 or 2800 mm

But there are Different external dimensions depending on customer requirements possible. For example, classic 20-foot office containers are used for the toilet containers at the Nuremberg Christkindlesmarkt.

In summary, the following are suitable Residential containers with interchangeable walls Ideal for construction site equipment or as Sanitary and WC containers. Thanks to the use of PU panels, they are robust, lightweight and can be converted as required. This is why they are often used as rental containers. But this system with its flexibility also has its advantages for the purchase of office containers. So if you would like to buy an office container in Nuremberg, we are happy to advise youwhich equipment and variant is ideal for you.

The second type of construction is containers with solid walls and a ventilated trapezoidal sheet metal roof. These containers are usually insulated with mineral wool. The interior walls are clad with decorative chipboard or drywall plasterboard. Due to the design, this type of construction is less variable than office containers with removable walls. These modules are often used for Office container systemsbut also School containers or other long-term buildings. The advantage here is that also 3 metre wide and up to 12 metre long office containers can be built. The insulation thicknesses for the floor frame and roof frame are also more flexible, allowing ENEV insulation and fire protection up to EI 90 to be realised. You can also order this type of office container from us. buy in Nuremberg and the metropolitan region of Fürth and Erlangen.

Another advantage is the Higher interior height of up to 2.80 m, which means that suspended acoustic ceilings are also possible. WC containers from this type of office container are often built with an attachment wall, making wall-hung WCs possible. Wall tiles are also very popular in bathrooms in Nuremberg.

Rainwater is drained from this office container via downpipes integrated into the container frame. the rainwater runs off in a controlled manner and can be collected underneath the container with drainage pipes. However, as the rain gutter is integrated into the frame of the container, it must be cleaned regularly. Containers with a trapezoidal sheet metal roof can be recognised by the fact that the roof frame is continuous. When these are stacked, the floor frame of the upper storey lies flat on the roof frame of the ground floor. The downpipes in the container corners are connected with a grommet during assembly. Also for roll-off containers This type of construction is often used for the transport of office containers, as the fixed walls ensure that the office container remains stable even when loading and unloading on the roll-off lorry. This type of construction is preferred for cladding office containers or residential containers with an external facade. Instead of trapezoidal sheet metal, an OSB wood-based panel can be used as the mounting base for a rear-ventilated curtain wall.

One advantage of these office containers is the Great creative freedom when it comes to colour design. Both the container frame and the walls can be painted in almost any colour at no great extra cost, and even colour combinations such as contrasting stripes are possible. This makes it possible to match construction site containers to the company colours.

To summarise, these residential containers are particularly suitable for buildings that are permanently installed in one place. We work with larger and heavier modules, for which a great deal can already be prepared in the factory. Also for Technology container These office containers are better suited to heavy installations than the type with removable walls. If you are interested in buying one of these office containers in Nuremberg or the Nuremberg metropolitan region, please do not hesitate to contact us. to contact! As we have both types of container on offer, we will find the right container for you, regardless of whether WC container, Sanitary containers , Switch cabinet container or Roll-off container.

We offer a wide range of office container variants. You have countless configuration options in both designs. We can provide you with expert advice - with almost 30 years of experience in the field of modular container systems in the Nuremberg metropolitan region.

• Galvanised container frame
• Special dimensions
• Container frame in contrasting colours - RAL special paint finish
• Insulation with polyurethane (PU panels)
• Insulation with mineral wool
• Hörmann steel doors
• Aluminium doors
• Plastic windows
• Aluminium windows
• LED lighting
• Cable duct
• Vinyl flooring
• Roller shutter
• Venetian blinds

With over 520,000 inhabitants, Nuremberg is the second largest city in Bavaria. As Centre of the Nuremberg-Fürth-Erlangen metropolitan regionIt is the economic, service and cultural centre of northern Bavaria, with a conurbation of around 2.5 million inhabitants.

The University City of Nuremberg, is located in the Bavarian region of Middle Franconia and has been a centre of cultural development and political upheaval since the Middle Ages. As a free imperial city, it was a centre of architectural masterpieces and German ingenuity in the Middle Ages. The medieval old town, the Germanic National Museum and the former Nazi Party Rally Grounds attract visitors from all over the world.

The service industry, electrical engineering, mechanical engineering and the Nuremberg Exhibition Centre are of great economic importance. Nuremberg is also home to the Federal Employment Agency and the Federal Office for Migration and Refugees.